Mutable Instruments Volts +5V Adapter
- All units of Grids manufactured before January 2014.
- All units of Edges manufactured before February 2015.
- All units of Braids manufactured before July 2015.
The Volts power adapter can however be used to power digital modules from other brands!
Recent cases, bus-boards, or power systems (such as TipTop Audio’s Zeus line, or MakeNoise Mini-PWR) provide a +5V source, but older Doepfer cases are only equipped with +12V and -12V. To bring to your system the +5V rail needed by some digital modules, an adapter such as Volts can be used.
First of all, make sure that your case/bus board does not already have a +5V source. Doepfer cases/bus boards have 3 LEDs, one for each voltage (-12V, +12V and +5V). Power your system on and check that the +5V LED is off before installing the power adapter! Using Volts in a case already equipped with a +5V source might damage your equipment.
Your system must be powered off during the installation of the power adapter. Insert the Volts power adapter on one of the 2×8 pin connectors on the bus board. Make sure that the -12V text printed on your bus-board is on the same side as the -12V text printed on the Volts module; and that all male pins of the bus board are inserted into Volts‘ connector.
Recent Mutable Instruments modules no longer require a +5V power adapter. This power adapter is only needed for: All units of Grids manufactured before January 2014. All units of Edges...
is back-ordered. We will ship it separately in 10 to 15 days.