RYO

RYO Trig Xpander DIY Kit

--

$65.00

In Stock
Trigger/Gate expansion for the RYO VC Sequencer

Introducing the first official channel expander module for the VC Sequencer, the Trig Xpander.

This will give your VC Sequencer 8 individual outputs for each step outputting either a trigger or a gate, selectable with a jumper on the pcb, and a 9th output that gives you a trigger for each step progression. Also on board is a trimmer for setting the trigger length to your liking.

The outputs are diode isolated, this allows for passive mixing of the outputs using a passive multiple/stackcable/IV cable, or a switched multiple/OR combiner such as the Doepfer A-182 or Low-Gain Short Bus.

The kit comes supplied with two PCBs (one with a v-cut that you break into two), front panel (PCB material), component kit, power and expansion cables and mounting screws.

Solder and tools not supplied.

Will also be available as PCB and/or front panel only option and assembled module.

***Assembly service includes assembly and testing of the module kit. Assembly may take 4-14 days from the date the service is ordered. Please call us at 347-699-2875 for accurate service turnaround time.

Trigger/Gate expansion for the RYO VC SequencerIntroducing the first official channel expander module for the VC Sequencer, the Trig Xpander.This will give your VC Sequencer 8 individual outputs for each...

« less

more »

Width: 4HP
Max Depth: 45mm
Power: 12mA@ +12V , 0mA@ -12V , ?mA@ +5V