Folktek

Folktek Resist

--

$50.00

In Stock
Resist is a simple 3HP module - 4 buffered potentiometers (knobs) which are routed to 4 different corresponding 3 point headers. Added control for any current or future Folktek module utilizing the header patchbay.

With Matter, Resist changes the game completely, adding a whole world of possibilities and expanding the sound and playability exponentially:

Use the jumpers to attenuate incoming CV/gate by jumping from the CV in on Matter to Resist and then to the main 1-20 patchbay. With the simple attenuation, aspects of Matter have much more control - changes in pitch, filtering, resonance etc. over sounds that were once much more static. Send the CV to the center of the header and send two jumpers to the main 1-20 patchbay and there begins to form a matrix, thereby deepening the sound. Jump one of the points already in Resist to another header, on to the main 1-20 and it goes deeper still...

Direct jumping from the Matter main patchbay to Resist allows Matter to become a controllable drone synth as pitch, filter, resonance, noise controls all become possible.

Add a CV sequence to an established drone by jumping into Matter CV in and develop rich, synchronized sequenced drone.

With Conduit:

Jump oscillations from Conduit to Resist and back to Conduit and there are now level controls for the oscillations.

Attenuate incoming CV controlling vactrols to adjust power and intensity.

Attenuate oscillations jumped to the delay input (which will also add control over the envelope follower (cv out)

Jump Conduit oscillations or delay out first to Resist, then to Matter to control Conduit levels in Matter circuitry.

Resist is a simple 3HP module - 4 buffered potentiometers (knobs) which are routed to 4 different corresponding 3 point headers. Added control for any current or future Folktek module...

« less

more »

Width: 3HP
Max Depth: 2mm
Power: 0mA@ +12V , 0mA@ -12V , 0mA@ +5V