ProModular

ProModular MIIIIX Commander Expander

--

$75.00

Out of Stock
To use COMMANDER, attach the expansion cable onto the header on the back of the module and the other end onto the MIIIIX expansion header marked “COMMANDER”. Be sure that the red stripe on the cable is next to the markings on both modules.

COMMANDER features Mute and Solo CV inputs for each of the MIIIIX channels to voltage control muting and soloing. Pulse signals are recommended for accurate timing but alternatively any signal that rises above and falls below +5V can be used to automate mute and solo functions.

Mute and Solo toggles with every cycle of the CV input waveform. For instance, a single pulse (rise/fall above/below +5V) will toggle mute or solo from off to on or on to off depending on the initial state. The next pulse will toggle back to the original state and so on.

To use COMMANDER, attach the expansion cable onto the header on the back of the module and the other end onto the MIIIIX expansion header marked “COMMANDER”. Be sure that...

« less

more »

Width: 2HP