Genus Modu Euro Header Adapter (EHA)
EHA is a kit with two small adapter boards plus heavy 14 AWG wire that lets you attach 16 pin Euro Power headers to the Genus Modu Low Impedance Bus Board (LIBB) or other bus boards. With EHA + LIBB you'll reduce both switching power supply noise and inter-module coupling noise in your system, while retaining the investment in your 4HP power supply.
The Euro Header Adapter provides a lower resistance connection from the 4HP module 16 pin euro heads to your bus board solution. When used with a Genus Modu LIBB, the typical end to end +12V or -12V resistance is 7 ohms or less and ground resistance is 5 ohms or less. Compare this to a 15 inch flying bus cable with 40 ohms of power rail resistance and 13.5 ohms of ground resistance. The higher resistances of flying bus cables increase noise coupling between modules. The cables also do not provide any filtering for the switching power supplies.
One EHA-S, one EHA-L and 30 inches of 5 color coded conductors are provided with each EHA kit.
For a 4HP wide power module, an additional 1HP of space may be required on one side for overhang of the terminal strips, depending on clearance to your cabinet side or to the adjacent module.
APPLICATIONSEHA is a kit with two small adapter boards plus heavy 14 AWG wire that lets you attach 16 pin Euro Power headers to the Genus Modu Low Impedance Bus...
is back-ordered. We will ship it separately in 10 to 15 days.