Doepfer

Doepfer A-100PMS12 (PSU3) Single Monster Case 12U 168HP

--

$1,999.00

Out of Stock
Outside dimensions (with front cover, closed state): ~ 90 (length) x 62 (height) x 23 (depth) cm.

Weight of the single case (incl. bus boards, power supplies, with front cover, without modules): ~ 20 kg.

Outside dimensions of the single case (without front cover): ~ 90 (length) x 62 (height) x 18 (depth) cm.

Weight of the single case (incl. bus boards, power supplies, without front cover, without modules): ~ 16 kg.

Weight of the front cover: ~ 4 kg.

Inside usable depth for A-100 modules: approx. 70 mm in the power supply area (bottom right), resp. approx. 100 mm in the remaining area (measured from inner side of the front panel until end of the pc board of the module) position of the mains inlet: center of the rear panel (standard), upon request even at the front side (same remarks as for the normal suitcase are valid).

Maximum output current with four built-in A-100PSU3 (since about early 2016): +12V/8000 mA, -12V/4800mA, +5V/16000mA.

Outside dimensions (with front cover, closed state): ~ 90 (length) x 62 (height) x 23 (depth) cm.Weight of the single case (incl. bus boards, power supplies, with front cover, without...

« less

more »