{"title":"VCAs","description":"","products":[{"product_id":"4ms-vca-matrix-vcam","title":"VCA Matrix (VCAM)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe VCA Matrix from 4ms is a playable 4x4 matrix of 16 VCAs. \u003cbr\u003e\u003cbr\u003eFour CV or audio inputs can be routed in any amount\/combination to four outputs, using the 16 CV control jacks, Level knobs, and Mute buttons.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"4ms","offers":[{"title":"Default Title","offer_id":9625217093,"sku":"4MS-VCA-MATRIX","price":375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/4ms-vcamatrixsilver-ctrl.png?v=1571272184"},{"product_id":"lxd","title":"LxD","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe LxD, Low Strike Duo, is a dual-response, two channel, direct-coupled, Low Pass Gate, which utilizes vactrols in order to provide simultaneous control over the Amplitude and Frequency Spectrum of an INput Signal. It is, in essence, a VCFA (Voltage Controlled Filter Amplifier). Unlike the Optomix, the LxD offers two different filter responses. CH. 1 offers a 12db\/ Octave response that is mildly-resonant, while CH. 2 offers a 6bd\/ Octave that is non-resonant. The OUTput of CH. 1 is normalled to the INput of CH. 2. This normalization puts the two channels in series, which is similar to the VCF into VCA arrangement made popular by many monosynths of the 1970’s.\u003c\/span\u003e","brand":"Make Noise","offers":[{"title":"Default Title","offer_id":9626297349,"sku":"MAKE-NOISE-LXD","price":110.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/makenoise-lxd-ctrl_5b2670de-bea2-4943-baa2-9d719f196bf6.png?v=1571272185"},{"product_id":"moddemix","title":"modDemix","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe modDemix features 2 identical direct-coupled balanced modulator circuits that may be used together or independently for Ring Modulation, VCA, Mixer, Signal Multiplication, Voltage Controlled Polarization, Attenuation and more.\u003c\/span\u003e","brand":"Make Noise","offers":[{"title":"Black","offer_id":48454150324542,"sku":"MAKE-NOISE-MODDEMIX","price":140.0,"currency_code":"USD","in_stock":false},{"title":"Silver","offer_id":48454150357310,"sku":"MAKE-NOISE-MODDEMIX-BLACK","price":140.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/files\/make-noise-moddemix-black-ctrl-mod.png?v=1705599267"},{"product_id":"optomix","title":"Optomix - Dual Low Pass Gate","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA two channel Low Pass Gate, providing simultaneous voltage control over amplitude and frequency content of a signal. It is in essence, a Voltage Controlled Filter Amplifier (VCFA) that has an extremely organic response to control signals. The Low Pass Gate is a classic West Coast synthesis circuit.\u003c\/span\u003e","brand":"Make Noise","offers":[{"title":"Default Title","offer_id":9627375045,"sku":"MAKE-NOISE-OPTOMIX-2","price":215.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/makenoise-optomix-ctrl_787fd3a1-2150-44ab-bb6d-47e6244c03d4.png?v=1571272185"},{"product_id":"alm-busy-circuits-tangle-quartet","title":"Tangle Quartet","description":"\u003cp\u003eTangle Quartet is a high quality quad linear voltage controlled amplifier (VCA) providing individual level control of 4 signal inputs with both individual outputs and a combined ‘mix’ output (for non patched outputs) . Control signal inputs and associated attenuation controls allow for voltage control of signal levels. Control inputs are normalized to 5V thus providing manual mix control in the absence of control signals.\u003c\/p\u003e","brand":"ALM Busy Circuits","offers":[{"title":"Default Title","offer_id":10042438341,"sku":"ALM-TANGLE","price":220.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/alm-tanglequartet-ctrl.png?v=1571272195"},{"product_id":"industrial-music-electronics-king-slender","title":"King Slender","description":"\u003cmeta charset=\"utf-8\"\u003eLinear slope slew limiter with CV input and gate enable. With no signal patched to CV in, attenuverter knob allows log\/expo curve bending. Mixer features three inputs, two with mute buttons and one with attenuverter, used for either audio signals or control voltages.","brand":"Industrial Music Electronics","offers":[{"title":"Default Title","offer_id":10114623109,"sku":"IME-KING","price":145.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/harvestman-kingslender-ctrlmod.png?v=1571272206"},{"product_id":"vca4p","title":"VCA4p Rev2","description":"\u003cp\u003eThe VCA4p based on the VCA from the classic Polyfusion modular synth. Unlike many modern VCAs this one centers around an OTA chip, like most VCAs from the 1970’s. While this VCA may not be perfect by today’s standards, it’s those imperfections that give the VCA4p it’s character and warmth. This VCA is meant to be used as 4 separate VCAs, a voltage controlled mixer or a combination of both. By using the jumpers on the back the user is able to configure this VCA to meet their specific needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRev2 Changes:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA classic returns better than ever. The Gain pot has its own CV path now\u003cbr\u003eso its curve is consistent regardless of the CV setting. The switch\u003cbr\u003echoosing between Linear and Exponential response has been replaced with\u003cbr\u003ea pot. This allows much more flexibility in how each channel of the\u003cbr\u003eVCA4p sounds. And finally it is now very skiff friendly and ready for\u003cbr\u003ethe thinnest of cases.\u003c\/p\u003e","brand":"bubblesound","offers":[{"title":"Default Title","offer_id":10219657925,"sku":"BBS-VCA4P","price":191.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/bbs-vca4pblack-ctrlmod.png?v=1571272218"},{"product_id":"erica-synths-pico-modulator","title":"Pico Modulator","description":"\u003cp\u003eErica Pico Modulator combines Envelope Generator and VCA in one module with straight-forward controls for live performances.\u003c\/p\u003e","brand":"Erica Synths","offers":[{"title":"Default Title","offer_id":38038177042,"sku":"ERICA-PICO-MODULATOR","price":139.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/erica-picomod-1-ctrlmod.png?v=1574354474"},{"product_id":"141","title":"141 EG\/VCA\/LFO","description":"The 141 is a EG\/VCA\/LFO that fills in gaps and helps clear out some case clutter.\u003cbr\u003e\u003cbr\u003eThe Envelope Generator is based around the Roland SH101\/M-140 era transistor EG giving the 141 a very snappy feel.\u003cbr\u003e\u003cbr\u003eThe EG is sent to the ENV OUT and to a VCA for the velocity sensitivity section of the circuit. The VEL IN is normalized to +12V, so when there is no input the VEL OUT is the same as the ENV OUT. But when positive voltage is applied to VEL IN the output of VEL OUT will vary as the voltage varies. The 141 ships set up for a 0-5V inout for the velocity sensitive VCA. This makes is compatible with most analog sequencers and modules from companies like Expert Sleepers. There is a 0-10V jumper setting on the back to make the 141 compatible with the Beat Step Pro and other CV sources that put out 0-10V.\u003cbr\u003e\u003cbr\u003eThe INV OUT is an inverted output of the EG with a range of 0 to -10V.\u003cbr\u003e\u003cbr\u003eAn Audio VCA is included and normalized to the EG by the 2 switches near the Audio Input. The VCA has Linear and Expo responses and the CV can either be the normal EG output or the velocity sensitive EG.\u003cbr\u003e\u003cbr\u003eThe LFO has a range from about 10 second to a little over 200Hz. The Triangle and Square outputs are always active. The Square is normalized to the Gate IN and when there is nothing plugged into it the LFO loops the EG. When an external Gate is plugged in the Sync switch can sync the LFO to the external gate or allow it to run freely.","brand":"bubblesound","offers":[{"title":"Default Title","offer_id":43367355154,"sku":"BBS-141-EG-VCA-LFO","price":225.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/bbs-141-1-ctrl.png?v=1574350341"},{"product_id":"tallin","title":"Tallin","description":"\u003cp\u003eTallin is a dual voltage controlled amplifier (VCA) with overdrive, offering some unusual control features and a range of attractive tonal characteristics. Each of the two identical channels offers two simultaneously available inputs for voltage control over signal attenuation or gain, with linear and exponential response to CV. Volume control knobs offer manual gain settings ranging from fully closed (-80dB) up to +18dB. A color LED indicator displays output signal levels. A soft-clip circuit avoids harsh clipping distortion, while a switchable overdrive circuit offers two carefully crafted distortion responses, simulating the sound of classic tube amplifiers. \u003cbr\u003e\u003cbr\u003eSince both CV inputs are simultaneously active, they can be jointly exploited within patches featuring more complex volume control that otherwise would require using two traditional VCAs in series. As the signal path is DC-coupled, Tallin can also be used for handling the control voltages.\u003cbr\u003e\u003cbr\u003eMODULE OVERVIEW\u003cbr\u003e\u003cbr\u003eTallin consists of two completely independent but functionally identical channels, A and B. Each channel is built around a “modern vintage” discrete VCA core with a matched transistor pair and multiple feedback topology. This gives Tallin a specific character not present in other VCAs that use mathematically precise and sonically pure integrated gain cell VCA chips.\u003cbr\u003e\u003cbr\u003eWith Tallin, we opted for a discrete core, to provide a thick and charming sound that reflects Xaoc’s tonal idiosyncrasy. The signal inputs accept Eurorack signal levels (typically 10Vpp, but capable of handling up to 20Vpp). They can also accept normal studio level (+4dBu) signals which can be amplified to the modular levels, thanks to the gain reserve of up to +18dB. The knobs control the attenuation or gain by scaling the corresponding control voltages. Thus, in a MIN position, they fully silence the channel, regardless of whatever control voltage is applied to the VCA. Turning a knob up will gradually open the VCA, offering a significant boost when above the 12 o’clock position (depending on the control voltage patched in). There are two CV inputs in each channel, respectively featuring an exponential and linear control response. Both controls are available simultaneously, and they jointly determine the gain of the VCA. A CV of 0V at either jack will close the VCA entirely, however both jacks are internally normalized to a constant voltage, so it is possible to use both, just one, or—for manual control only—neither. It is convenient to think of each channel of Tallin as consisting of two VCAs in series (exponential followed by linear), even though the internal implementation is a single circuit. Both CV inputs are optimized for voltages up to 8V, however they can handle envelopes as hot as 10V, or as low as 5V (although the VCA may not open fully in such a case). The internal normalization of both CV inputs is set to 8V. Tallin’s response to combined CV and manual settings is discussed in next section. Each channel of Tallin features a 3-position DRIVE switch that selects between the non distorted linear operation (switch in middle position), a symmetric overdrive yielding mostly 3rd harmonic distortion (switch in up position), or a non-symmetric overdrive yielding mostly 2nd harmonic distortion (switch in down position). See ”Overdrive Operation” for more details. The amplified signals are available at the output jacks. Signals that would exceed 18Vpp are subject to internal soft clipping to avoid harsh distortions due to the limited dynamic range (20Vpp) of Tallin’s operational amplifiers.\u003cbr\u003e\u003cbr\u003eThe multi-color LEDs indicate output signal levels in four stages, from silence to the normal 10Vpp level (gradually lit green), exceeding it (by changing to yellow), and finally, reaching very hot levels (by turning orange), and engaging the soft clipping circuit (by turning red).\u003cbr\u003e\u003cbr\u003eOPERATING THE VOLUME CONTROL\u003cbr\u003e\u003cbr\u003eThe volume knobs are scaled so that the central position yields 0dB, or 100% of original amplitude, provided there is either nothing patched to the CV inputs, or there is a control voltage of 8V. Turning the knob past the central position will engage a boost allowing the amplification of quiet signals up to modular levels. Keep in mind that if the input is a modular level signal you should expect soft clipping to engage quickly and provide a heavy distortion by the end of the knob’s travel.\u003cbr\u003e\u003cbr\u003eThe EXPO input offers an exponential control of the output amplitude, which means the amplitude will decrease rapidly as the voltage approaches zero. Since human sensitivity to sound intensity is nearly exponential, this exponential input yields a natural sounding loudness decrease when using CV sources that change linearly in time. Since there is a significant variety of envelope amplitudes in eurorack, the sensitivity of this input can be adjusted to adapt to the provided control source by using the knob. It is optimally suited to 8V envelopes in the central (12 o’clock) position, and should be turned down to the 10 o’clock position when using a 10V envelope. Using 10V envelopes without turning down the knob will result in a severely compressed response, that delivers a thick, and somewhat unnatural, sound which can be creatively abused if that’s your preference. For 5V envelopes, the output will be very quiet. This can be compensated with the BOOST range of the knob, however you may be unable to reach overdrive levels in this case.\u003cbr\u003e\u003cbr\u003eThe LINEAR input offers linear control, which means the output amplitude will scale proportionally to the CV. If you have an exponential envelope, it’s a good idea to use this input, because it will result in signal amplitude that follows the envelope, decaying towards zero with a natural exponential tail. Envelopes with amplitude different from 8V can be easily used here, requiring only a small adjustment of the knob to compensate.\u003cbr\u003e\u003cbr\u003eOVERDRIVE OPERATION\u003cbr\u003e\u003cbr\u003eThe overdrive circuit in Tallin offers two distinctive distortion characteristics switchable via the DRIVE toggles. The upper, SYMMETRIC position activates a bi-polar parabolic distortion curve that equally amplifies and squashes both peaks of the waveform, yielding a spectrum dominated by 3rd order harmonic overtone. The resulting slightly brightened sound is modeled after an overdriven push-pull power amplifier. The lower ASYMMETRIC position of the switch activates a distortion curve that is more concave in one direction while it is convex in the opposite direction, yielding a spectrum dominated by 2nd order harmonic overtone. The resulting mellow and warm sound is modeled after a classic single-ended tube amplifier.\u003c\/p\u003e","brand":"XAOC Devices","offers":[{"title":"Default Title","offer_id":317232447506,"sku":"XAOC-TALLIN","price":209.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/xaoc-tallin-1-ctrl.png?v=1574355205"},{"product_id":"bastl-instruments-timber","title":"Timber","description":"Dual Waveform Lumberjack\u003cbr\u003e\u003cbr\u003eTimber is very flexible wave shaping module that can produce rich timbres by adding harmonics to simple waveforms (triangles and sinewaves) or any other signal. It has 2 different unique wave shaping circuits – I. – the WAVE DRIVER and II. -the WAVE FOLDER and voltage controlled crossfader to fade between the different circuits or between one of them and the clean input signal.\u003cbr\u003e\u003cbr\u003eBoth circuits share the same control voltages: the SHAPE which sets the input amplification before the wave shaping circuit and the SYMMETRY control which adds voltage offset to the input signal to provide various asymmetric overdrives or wave folding sounds. There is also voltage FBK CV jack which when provided with positive voltages feeds respective portion of the output signal back to the input which results in chaotic and aggressive behaviours. It is calibrated to work well with 5V gate voltages.\u003cbr\u003e\u003cbr\u003eI. the WAVE DRIVER is an overdrive circuit with one folding stage and it has 2 configuration 3-way switches (9 different configurations). The drive switch can set the overdrive character to SOFT or HARD or something in between. The FOLD switch can set the folding threshold to HI or LO or it can turn the folding stage off in the NO position.\u003cbr\u003e\u003cbr\u003eII. the WAVE FOLDER is a novel take on the serge style wavefolding circuit which has specific behaviour to abuse the high gain of the input amplification stage to provide rich high frequency timbres with higher settings of the SHAPE parameter. It has a configuration switch which can either activate clean 4 stage wavefolding in the OK position or highly asymmetric folding stage in the KO position that provides strange metallic character. The NO position provides only the very last overdrive-folding stage.","brand":"Bastl Instruments","offers":[{"title":"Default Title","offer_id":14798709325883,"sku":"BASTL-TIMBER","price":220.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/bastl-timber-black-1-ctrlmod.png?v=1616004530"},{"product_id":"muton","title":"Muton","description":"\u003cp\u003eMUTON (pronounced MUTE-ON) is an 8 channel VCA and cascading summing mixer, with click-less mutes.\u003c\/p\u003e\n\u003cp\u003eMUTON is an indispensable tool for performing live and creating a more complex and controllable patch environment. Many direct and mix output schemes are possible due to the cascading nature of the outputs.\u003c\/p\u003e","brand":"Steady State Fate (SSF)","offers":[{"title":"Default Title","offer_id":17977770213435,"sku":"SSF-MUTON","price":249.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/ssf_muton_1.2_ctrlmod.png?v=1574354249"},{"product_id":"make-noise-qpas","title":"QPAS","description":"\u003cp\u003eThe Quad Peak Animation System combines the auditory enveloping of stereo spaced peaks with the animation of two or more peaks in a single channel dancing around each other or engaging in primitive vocalizations. QPAS is Quad Core, containing four identical state variable filter cores with a control system powerful enough to guide them in stereo multi-peak operation, but simple enough to encourage system integration rather than domination.\u003c\/p\u003e","brand":"Make Noise","offers":[{"title":"Default Title","offer_id":19302974881846,"sku":"MAKE-NOISE-QPAS","price":379.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/makenoise-qpas-1.1.png?v=1574354652"},{"product_id":"sinc-bucina","title":"Sinc Bucina - Envelope Generator \/ Low Pass Gate","description":"\u003cp\u003e\u003cem\u003eSinc\u003c\/em\u003e -- shortened from Sinclastic from Old English sinc 'treasure', from greek clastic 'easily removable'\u003cbr\u003e\u003cem\u003eBucina\u003c\/em\u003e -- from Latin: “War Trumpet”\u003cbr\u003e\u003cbr\u003eSinc Bucina is the sequel to one of our first modules, Sinclastic Empulatrix, replacing the clamping VCA with a resonant lowpass VCF and VCA combo. The velocity-dependent Ping input offers classic release-only LPG behavior, while the Gate in offers much more complex slewing, useful for simple ASR envelopes to dynamic modulation. The envelope out allows the internal envelope to be routed out into a patch for even more versatility and modulation fun. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Noise Engineering","offers":[{"title":"Default Title","offer_id":20158207000630,"sku":"NOISE-ENGINEERING-SINC-BUCINA","price":202.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/ne-sinc-bucina-pre-ctrlmod.png?v=1574354938"},{"product_id":"instruo-vinca","title":"VINCA","description":"\u003cp\u003eMore than just a dual vca the vincâ can be a controller, mixer, ring modulator,\u003cbr\u003ecompressor, signals can be scaled, offset, amplified, attenuated and all CV controllable.\u003cbr\u003eThe top channel features a four-quadrant VCA with attenuverters over both modulator\u003cbr\u003eand carrier signals. The lower channel interpolates from linear to exponential response\u003cbr\u003eand has a full length fader for optimum performability.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe two vca's can be switched to operate in series or in parallel opening up a surprising\u003cbr\u003enumber of routing capabilities. The vincâ also features back jacks allowing them to be\u003cbr\u003edaisy chained across a system ad infinitum to form a multi-channel mixing\/routing\u003cbr\u003eeco-system. With nothing plugged in each channel also has a normalised DC reference\u003cbr\u003evoltage at its output which can be scaled to give you full fader control over anything\u003cbr\u003efrom -\/+10V.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Instruo","offers":[{"title":"Default Title","offer_id":21030721585206,"sku":"INSTRUO-VINCA","price":239.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/instruo-vca-1-ctrlmod_d1bed49e-26d8-4fe8-896c-8daf27303866.png?v=1574355630"},{"product_id":"hexvca","title":"HEXvca","description":"The HEXvca is 6 independent VCAs with 3 mix outputs. Each VCA is switchable between a linear and exponential CV response. The CV inputs are normalized using jumpers on the back, so 1 or 2 gates or EGs can affect several VCAs at the same time.\u003cbr\u003e\u003cbr\u003eWith headers on the back the HEXvca can be triggered by the HEXar using a ribbon cable eliminating the need for patch cords. There is also a 6 pin header for the audio inputs for future expansion without patch cables. \u003cbr\u003e\u003cbr\u003eThe MIX section allows the HEXvca to be a voltage controlled Mixer, channels 1-3, 4-6 and 1-6 have dedicated outputs. The VCAs are DC so the VCAs can be used for audio or CV. \u003cbr\u003e\u003cbr\u003eThe HEXvca uses SSM2164 VVCA chips that provide plenty of headroom, very low distortion\/noise and use very little power. The HEXvca is 7HP and around 30MM deep. You can never have enough VCAs but with the HEXvca it’s easier to have as many as you need.\u003cbr\u003e\u003cbr\u003e","brand":"bubblesound","offers":[{"title":"Default Title","offer_id":30947232219190,"sku":"","price":299.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/bbs-HEXvca-2-ctrl_06b286e8-9439-4d89-a74c-fd9a096108fb.png?v=1576866762"},{"product_id":"worng-vertex","title":"Vertex","description":"Vertex is a stereo VCA with some clever tricks up its sleeve to give you more control over the stereo domain. Vertex contains four analogue VCAs configured in such a way as to give you voltage control of the amplitude of a stereo signal (or make a mono signal stereo) as well as having control of the balance or panning of the signal.\u003cbr\u003e\u003cbr\u003eEasily patch up a stereo signal path with a single envelope generator, skew your stereo image or pan a mono signal with CV. Vertex also takes advantage of the VCAs used to be able to saturate at unity gain without distorting your audio signal. This means that you can waveshape an AD envelope into an AHD using the Skew control to add punch to your patch, and use the Skew CV to dynamically alter the envelope timing to change the relative loudness between the Left and Right signals while still keeping the peak signal levels the same.\u003cbr\u003e\u003cbr\u003eVertex is also a great tool for controlling the dynamics of an XY signal for oscilloscope or vector laser patches.","brand":"Worng Electronics","offers":[{"title":"Default Title","offer_id":32068179820598,"sku":"WORNG-VERTEX","price":215.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/vertex-1-ctrlmod.png?v=1588008789"},{"product_id":"erica-synths-pico-lpg-low-pass-gate","title":"Pico LPG Low Pass Gate","description":"\u003cp\u003eErica Pico LPG is our take on classical Don Buchla LPG designs. We use vactrols in the circuit for that signature sound, and we added some more features, like configurable resonance and built-in decay envelope.\u003c\/p\u003e","brand":"Erica Synths","offers":[{"title":"Default Title","offer_id":32400638148662,"sku":"ERICA-PICO-LPG","price":139.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/erica-pico-lpg-1-ctrlmod.png?v=1592930016"},{"product_id":"seca-ruina-multiband-distortion-vca","title":"Seca Ruina - Multiband Distortion \u0026 VCA","description":"\u003cp\u003eDistortion is fun, but it’s even better when you split it up across the frequency spectrum. Seca Ruina takes an input, splits it up into three frequency bands, and lets you drive them into annihilation. SR includes a bypassable VCA on the output and CV over individual band and universal drive amount. With individual outputs for each band, you can process each band further externally.\u003c\/p\u003e","brand":"Noise Engineering","offers":[{"title":"Default Title","offer_id":32422121472054,"sku":"NOISE-ENG-SECA-RUINA-BLACK","price":260.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/ne-secaruina-black-1-ctrlmod.png?v=1593183978"},{"product_id":"befaco-hex-mix-vca","title":"Hex Mix VCA","description":"\u003cp\u003eHex mix VCA is a compact six channel VCA with an unique response curve range from logarithmic to linear and to exponential using a pot.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAll outputs are routed to output six to act as a mixer, with a normalization of each one to remove each VCA from the Mix.\u003c\/p\u003e","brand":"Befaco","offers":[{"title":"Default Title","offer_id":32480819839030,"sku":"BEFACO-HEX-MIX-VCA","price":340.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/hexvca-black-1-ctrlmod.png?v=1594067101"},{"product_id":"wmd-javelin-envelope-and-vca","title":"Javelin - Envelope and VCA","description":"Javelin is the envelope we at WMD have always needed to make.  We took the best parts from our classic Multimode Envelope and combined them with the simplicity and convenience of an ADSR with integrated VCA.  We then took the tricks we have learned from live performance and use of other awesome synthesizers and put it all together to create what we truly believe is the ultimate Eurorack envelope.\u003cbr\u003e\u003cbr\u003eJavelin starts out as a simple ADSR envelope.  We then added 3 level ranges, giving you control over the envelope's overall amplitude.  Next, 3 time ranges allow for quick switching of the feel of the envelope.  These ranges were carefully designed to work with each other, making the switch a fun and playable part of the interface.  Short and snappy, long and drawn out (max 88 minutes per stage with 5V in a stage's CV input), the Javelin will suit any style of music or playing style.\u003cbr\u003e\u003cbr\u003eExpression is key.  We wanted to make the most expressive, emotional sounding envelope we possibly could.  The addition of Accent and Choke inputs make for very interesting sequences that are just a couple gates away. \u003cbr\u003eThe Accent behavior is incredibly unique.  Multiple consecutive gates while the Accent input is high cause the envelope to climb a bit higher with each gate, causing whatever you are controlling to accent a bit harder on each next gate.  When controlling a filter, this creates a sound that can be personified with breathing, laughing, screaming, or crying, and is the key to the perfect, funky, acid style bass line. This behavior can also be disabled if you prefer a static Accent level.\u003cbr\u003e\u003cbr\u003eAs if that's not enough, the Accent input is actually a CV input which lets you use CV to effect the amount of accent with intention.  3 different accent ranges let you choose the maximum amount that the envelope will accent to.   Complete control!\u003cbr\u003e\u003cbr\u003eReset lets you stop the envelope in it's tracks with a gate signal.   This is great for using long envelope times for some steps and cutting them off for others without the need for another CV channel.  However, Attack and Release also have CV inputs can can be sequenced externally.  Release CV can even be routed to control Decay and Release simultaneously, a common control scheme in vintage style synthesizer envelopes.\u003cbr\u003e\u003cbr\u003eCombining all of these methods of control on Javelin let you pinpoint the sound you are after.  An absolute joy to work with.\u003cbr\u003e","brand":"WMD","offers":[{"title":"Default Title","offer_id":32546282733622,"sku":"WMD-JAVELIN","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/wmd-javelin-1-ctrlmod.png?v=1595257351"},{"product_id":"future-sound-systems-tg4-gristleizer-modulator","title":"TG4 Gristleizer Modulator","description":"The Gristleizer Modulator presents another key component of the Gristleizer in a Eurorack module - its JFET-controlled voltage-controlled amplifier. Whilst originally controlled by the Gristleizer's oscillator to achieve tremolo (or amplitude modulation) effects, the TG4 can be controlled by any control source available in a Eurorack system and, therefore, be used as a conventional VCA with some added features.\u003cbr\u003e\u003cbr\u003eThe Bias control sets the initial control point of the amplitude modulation, whilst a control voltage attenu-verter for CV2 allows for full control over how the amplitude is modulated. On top of this, the TG4 features a Dirt control, which allows the user to alter the behaviour of the JFET stage. At zero Dirt, the Modulator offers a super-clean VCA, whilst at maximum Dirt, waveforms become drastically mutated, at times beyond recognition. With the Dirt setting at 12 o'clock, the Modulator behaves exactly like the original VCA circuit of the Guitar Effects Pedal design. Also note that the JFET tends to exhibit second-harmonic distortion, similar to that of vacuum-tube amplifiers. Therefore, the TG4 presents not just a VCA, but also a module for adding distortion and character to audio signals.","brand":"Future Sound Systems","offers":[{"title":"Default Title","offer_id":32609680228406,"sku":"FSS-TG4","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/fss-tg4-1-ctrlmod.png?v=1596475516"},{"product_id":"tiptop-audio-vca","title":"VCA","description":"The Tiptop Audio VCA is a full featured, precision calibrated, analog Voltage Controlled Amplifier. At its heart is a novel design of a control circuitry—a function that lets you sweep continuously through three different response curves: Logarithmic, Linear, Exponential—giving you all three shapes in a single module. This special control circuitry design by Mr. Osamu Hoshuyama was adopted into the VCA module to make it a great sounding synthesizer VCA with flexibility to address all duties: level control for both audio and CV modulation, gating audio into silence, and amplitude modulation effects.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eA VCA, Voltage Controlled Amplifier, sometimes referred to as an audio gate, is an essential module to any Eurorack and no system is complete without one. The concept is an input, an output and a control that sets how much of the input signal passes through to the output.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eA great VCA means minimum feedthrough of the control signal bleeding into the passing signal and minimum distortion applied to the passing signal. An excellent audio gate means minimal leakage of signal from IN to OUT when the control tells the VCA to fully close. These are the most critical conditions for a good sounding, good responding VCA and are what the Tiptop Audio design carefully addresses. 2 LED peak indicator lights on the front panel light up with incoming CV or audio signals. While a clipping indicator for audio is expected, clipping of CV is often overlooked and it’s included here to visually maintain the full dynamic range of an envelope driving the VCA.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Tiptop Audio VCA lets you concentrate on creative uses rather than figuring out the module’s anomalies. The result is an excellent sounding synthesizer VCA that’s a joy to use and pleasing to hear.","brand":"Tiptop Audio","offers":[{"title":"Default Title","offer_id":32782638350390,"sku":"TIPTOP-VCA","price":140.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/tiptop-vca-1-ctrlmod.png?v=1600708906"},{"product_id":"erica-synths-black-vca2","title":"Black Quad VCA2","description":"Erica Synths Black Quad VCA, despite its compact size, is designed in line with the Black Series Hi-Fi philosophy, our custom pre-emphasis – de-emphasis circuits preserve all the nuances of the original signal.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eErica Synths Black Quad VCA2 is a versatile four channel voltage controlled amplifier and mixer module for use in complex modular systems. Each channel has linear\/logarithmic response selector and signal level indicator LED. All outputs are sequentially mixed and CV inputs are normalled to each other, so you can use the module in various configurations. If no CV is applied, the Black Quad VCA2 performs as a signal mixer, and the 4th channel is DC coupled for controlling CV sources, as well.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eErica Black series are high-end modules with unique functionality. Only the highest quality components are used and all inputs and outputs are protected against undesired overvoltage. When designing the Black Series, we did not economise on the module width, we put design and usability first. Big knobs are assigned to functions that make difference in sound. Together the Erica Black series are a range of modules that make an entire synthesizer.","brand":"Erica Synths","offers":[{"title":"Default Title","offer_id":32931483254838,"sku":"ERICA-BLACK-QUAD-VCA2","price":249.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/erica-quadvca-1-ctrlmod.png?v=1604348567"},{"product_id":"joranalogue-morph4-dimensional-modulation-array","title":"Morph 4 - Dimensional Modulation Array","description":"Modulation is the core concept of modular synthesis: parameters changing over time, adding movement and musical interest to what would otherwise be merely static sounds. Being able to control the amplitude of signals throughout a patch is therefore essential, and one can never have too many voltage controlled amplifiers (VCAs).\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eDesigned as a fully-featured modulation hub for Eurorack synthesisers, Morph 4 takes the basic concept of the multi-VCA module to the next level.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFour linear amplitude modulators are controlled by a master ‘morph’ parameter. The response of each modulator to this parameter is completely variable, both manually and under voltage control, and can be overridden if desired. Each response is triangular, with the ‘position’ parameter setting the maximum point along the morph axis, while ‘span’ determines the width of the triangle’s base.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIn addition to separate signal inputs and outputs, a variety of combined outputs is available as well: A+B, C+D, add (unity gain) and averaging mixes, and instantaneous minimum and maximum. Input normalisation makes it easy to send the same signal to multiple modulators, while output and modulator response LEDs provide essential visual feedback.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe combination of master control, fully flexible modulators and multiple combined outputs creates a module truly embodying the spirit of ‘patch programmable’ modular synthesis. Use Morph 4 as a voltage controlled mixer, dual crossfader, dual panner, interpolating scanner, interpolating distributor, quad VCA, quadraphonic controller, slope modifier, rectifier, complex waveshaper or something in between any of those—the choice is yours.","brand":"Joranalogue","offers":[{"title":"Default Title","offer_id":33000862449718,"sku":"JORANALOGUE-MORPH4","price":405.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/joranalogue-morph4-1-ctrlmod.png?v=1607021537"},{"product_id":"after-later-audio-blend","title":"Blend CV\/Audio Mixer and Dual VCA","description":"\u003cp\u003e\u003cstrong\u003eCV Sections\u003c\/strong\u003e\u003cbr\u003eBlend has two CV sections each with:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput (normalled to a +5V signal)\u003c\/li\u003e\n\u003cli\u003eAttenuverter\u003c\/li\u003e\n\u003cli\u003eOutput\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCV Mixer section\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eBlend takes the outputs of the two CV sections and offers the following:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMin output\u003c\/li\u003e\n\u003cli\u003eMax output\u003c\/li\u003e\n\u003cli\u003eComparator output (level brought down to 4.5V)\u003c\/li\u003e\n\u003cli\u003eSum output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe min and max sections do not attempt to be precision min\/max measurements. They will be within two diode drops of the actual min or max voltage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVCA Sections\u003c\/strong\u003e\u003cbr\u003eThere are two VCA sections that are also have a mix output. The CV input for each VCA is normalled to the output of a CV section. The VCA circuits are LM13700 based so they will slightly color the sound. The response curve is nearly linear but offers a slight exponential curve.\u003c\/p\u003e","brand":"After Later Audio","offers":[{"title":"Default Title","offer_id":33066870898742,"sku":"AFTER-LATER-BLEND","price":119.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/afterlater-blend-1-ctrlmod.png?v=1612216928"},{"product_id":"after-later-audio-dvca-1u","title":"DVCA 1U","description":"DVCA is a dual VCA based on the Mutable Instruments Veils. It features two separate voltage controlled amplifiers, both with a gain and a response curve potentiometer, that is variable from linear to exponential. The outputs are normaled, so when no patch cable is present on output 1, output 2 will contain both signals, allowing the module to be used as a mixer. Several DVCAs can be daisy-chained for voltage controlled mixer operation.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eComes with jack lights that can be disabled via a jumper on the back.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe panel is an After Later Audio black panel with gold accents.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe module is fully assembled and tested. Eurorack power cable included.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e","brand":"After Later Audio","offers":[{"title":"Default Title","offer_id":33066873061430,"sku":"AFTER-LATER-DVCA-1U","price":119.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/afterlater-dvca1u-1-ctrlmod.png?v=1612213535"},{"product_id":"erica-synths-black-lpg","title":"Black LPG","description":"\u003cp\u003eErica Synths Black LPG is our take on Lowpass Gate idea – it’s designed from scratch featuring 2nd order lowpass VCF (the original Buchla lowpass gate was 1st order VCF) and VCA combo with distinct resonance circuit on top. Voltage control over VCF cutoff frequency\/VCA offset and mode (VCF\/VCF+VCA\/VCA), as well as built in decay envelope generator makes it a versatile module for sound shaping in any modular setup.\u003c\/p\u003e","brand":"Erica Synths","offers":[{"title":"Default Title","offer_id":33093093195830,"sku":"ERICA-BLACK-LPG","price":209.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/Erica-Synths-Black-LPG.png?v=1613518705"},{"product_id":"erica-synths-pico-vca2","title":"Pico VCA2","description":"The Erica Synths Pico VCA2 is compact voltage controlled amplifier module, based on reliable AS3330 chip. It features two independent channels, and the first one comes with the manual offset adjustment, useful for full span vibrato effects. Audio and CV inputs of the first VCA are normalled to the second one, so the module can also be used as a buffered audio splitter. VCAs are DC coupled, and they can be used for controlling amplitude of control voltage signals.\u003cbr data-mce-fragment=\"1\"\u003e","brand":"Erica Synths","offers":[{"title":"Default Title","offer_id":33093103747126,"sku":"ERICA-PICO-VCA2","price":92.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/Erica-Synths-Pico-VCA2.png?v=1613521887"},{"product_id":"qu-bit-electronix-cascade-ratchet-envelope","title":"Cascade - Ratchet Envelope","description":"Cascade is a ratcheting envelope generator, VCA, and sound source all within a compact form factor. The unique interactions of its feature set open up new worlds of rhythmic patching and modulation. Easily create ratcheting sequences, bouncy-ball modulation, and pumping compression, all within a single module. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAt its core, Cascade is a powerful envelope generator, which is normaled to a high fidelity 2164 based VCA. You can patch in external audio to the VCA, or take advantage of 4 internal audio algorithms: white noise, 808 kick and hi-hat, and a high frequency sine tone. Cascade will open up your system in ways that make you wonder how you ever lived without it.","brand":"Qu-Bit Electronix","offers":[{"title":"Default Title","offer_id":39260325445686,"sku":"QU-BIT-CASCADE","price":299.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/qubit-cascade-1-ctrlmod.png?v=1614781336"},{"product_id":"befaco-a-b-c","title":"A*B+C","description":"\u003cp\u003eA*B+C is a dual, four-quadrant multiplier with VC Offset that can act as Dual Ring Modulator, Dual VCA and Four Channel Mixer.\u003c\/p\u003e\n\u003cp\u003eEach section can perform the analog multiplication of two signals (A and B) and add an offset (C).\u003c\/p\u003e","brand":"Befaco","offers":[{"title":"Default Title","offer_id":39364172054582,"sku":"BEFACO-A-B-C","price":175.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/befaco-a_b_c.png?v=1619202681"},{"product_id":"cosmotronic-delta-v","title":"Delta-V Dual Channel Function Generator \u0026 VCA","description":"\u003cp\u003eDelta-V features two function generators with additional VCAs. The components are matched very well. Their sound is clean and free of clipping. Used as envelopes, the function generators are ideal for crisp, percussive sounds. In LFO mode, the circuits go up into the audible range. Features such as shapeable attack and decay curves, slew inputs and EOC outs complete the outstanding overall impression. \u003c\/p\u003e\n\u003cp\u003eDelta-V offers to identical function generators. Using switches, it is possible to choose between a one-shot (envelope) and cycle mode (LFO). Attack and decay times are set via knobs. A third potentiometer per function generator determines the curve shapes. The control range goes from exponential to linear and finally logarithmic characteristic. In envelope mode, the modulators can be activated via trigger channels. For variations, there are slew inputs. Attack and decay parameters can be modulated as well. Signals generated by the function generators are available at the Out connectors. – At least as long as no cables are plugged into the VCA inputs. If this is the case, the signal flow changes. Then, signals processed by the VCAs are emitted via the Out sockets. EOC connectors produce a trigger at the end of each envelope respectively LFO cycle.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e","brand":"Cosmotronic","offers":[{"title":"Default Title","offer_id":39400218099766,"sku":"COSMOTRONIC-DELTA-V","price":278.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/cosmotronic-delta-v.png?v=1619799453"},{"product_id":"ssf-bii-electronics-triptych","title":"Triptych","description":"\u003cp\u003eIntroducing BII Electronics, a new maker of modular tools for music creation and sound destruction.\u003c\/p\u003e\n\u003cp\u003eFounded by musicians and friends Boys Noize and Baseck, BII is driven by a shared obsession with Eurorack-based processes, bringing ideas to reality through collaboration with the world's best specialist hardware manufacturers.\u003c\/p\u003e\n\u003cp\u003eTwo artists, with combined decades of sound design, music production, and live performance experience, joined by one innovator in engineering and manufacturing. This team of three's collective inspiration and individual insights are embodied in the form and function of every BII instrument. With this partnership in mind, it is fitting that BII's inaugural module carries the name \"TRIPTYCH.\"\u003c\/p\u003e\n\u003cp\u003eTRIPTYCH was imagined through hands-on practice -- the discovery of a unique chain of three devices generating sounds of incomparable timbral character, and an affinity for compact modules with an all-analogue signal path.\u003c\/p\u003e\n\u003cp\u003eAlready enthusiasts of the craftsmanship of New York-based hardware producer Steady State Fate, Boys Noize and Baseck invited SSF designer Andrew Morelli to collaborate on BII's first module. The newly formed trio's combined knowledge and uncompromising attention to detail resulted in a bespoke, completely integrated module that surpassed expectations: Distortion (3x), Flange\/Comb, and Filter, with all paths internally re-routable. TRIPTYCH was born. \u003c\/p\u003e\n\u003cp\u003eThree collaborators, three effects, and endless possibilities - we look forward to hearing what you discover as you unfold BII Electronic's TRIPTYCH.\u003c\/p\u003e\n\u003cp\u003eTriptych is a multi-tiered module consisting of a trio of internally re-routable effects with the addition of input and output voltage-controlled amplifiers. From distortion to karplus-strong and polyphonic resonance, Triptych is designed to be a unique sound shaping and transformation tool – from subtle to extreme via a fully analog signal path.\u003c\/p\u003e","brand":"Steady State Fate (SSF)","offers":[{"title":"Default Title","offer_id":39405798654006,"sku":"BII-SSF-TRIPTYCH","price":399.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/ssf-triptych.png?v=1620757073"},{"product_id":"cre8audio-mr-phil-ter","title":"Mr. Phil Ter","description":"Mr. Phil Ter isn’t the smartest name for a module that has an envelope generator, VCA, and a filter in it. Well, we never claimed to be smart. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMr. Phil Ter, or Phil as we affectionately call it, is a module that does a whole bunch of analog and digital stuff, in not a lot of HP. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePhil’s digital bits are solely comprised of the envelope generator, for your envelopy pleasure.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe analog bits, developed in partnership with the ultra-serious folks at Pittsburgh Modular Synthesizers (a very serious synthesizer company) and are comprised of a voltage controlled amplifier circuit (VCA) as well as an extra juicy old-school transistor ladder filter, perfect for those of you who are not afraid of ladders or transistors. (personally, we’re terrified of them).\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAnyway, pair Mr. Phil Ter up with any oscillator or crank up its own filter section’s resonance and self-oscillate, get crazy. He’s just what the doctor ordered to complete (or not) any synthesizer voice.","brand":"Cre8audio","offers":[{"title":"Default Title","offer_id":39570380390454,"sku":"CRE8AUDIO-MR-PHIL-TER","price":149.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/cre8audio-phil-ter-ctrl-mod.png?v=1626456000"},{"product_id":"noise-engineering-quantus-ampla","title":"Quantus Ampla - Quad VCA","description":"Quantus Ampla is a 6HP quad VCA with some tricks up its sleeve. From the top, each channel has two independent modes: Amplify, which gives you normal VCA response, and Attenuate, which makes the VCAs close instead of open in response to positive CV. The CV inputs are circularly normalled which can make complex patches not so complex.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePlus, the outputs mix down, so if you want to blend your voices together, you can with a single patch cable!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eDid we mention that Quantus Ampla is completely DC coupled, too? That’s right, you can use it to process CV as well as audio! Use QA to create some staple patches like volume control or something more out-of-the-box like ducking and crossfading: however you want to VCA, QA has you covered.","brand":"Noise Engineering","offers":[{"title":"Default Title","offer_id":39674975846454,"sku":"","price":237.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/noise-engineering-quantus-ampla-ctrl-mod.png?v=1629476705"},{"product_id":"ssf-autodub","title":"Autodub","description":"\u003cp\u003eAUTODUB is a DC coupled stereo VCA tailored for interactive dub style effects and event generation via a live performance friendly effect send activation button.\u003c\/p\u003e\n\u003cp\u003eThe SEND VCA is activated by the selectable momentary or toggle behavior of the large button on the bottom of the module. A normalized voltage controlling the VCA exhibits a click-less un-mute\/mute whenever this button is respectively activated\/deactivated. An external CV may be used to control the SEND VCA. The button will then activate or deactivate this control voltage signal.\u003c\/p\u003e\n\u003cp\u003eA convenient GATE output jack provides a gated high signal whenever the button is active. This feature allows for timed control of external modules such as envelopes, VC switches, bursts, or advancing sequences and other control signals when the button is in the ON state. Timed CVs can then be routed to external modulate-able parameters or patched into the SEND VCA CV input, allowing for more dynamic fades and modulations to control the effect SEND level.\u003c\/p\u003e\n\u003cp\u003eThe DRY-WET mixer allows for fine adjustment or up to 2x gain on the original INPUT signal and up to 4x gain on the RETURN signal, granted that the SEND is routed back to return inputs. The LEVEL control will fully attenuate or realize the full potential gain in this instance.\u003c\/p\u003e\n\u003cp\u003eAUTODUB is not limited to processing audio signals (DC coupled) and therefore can be used to interactively mix control voltage signals and\/or boost these signals when higher levels are required.\u003c\/p\u003e\n\u003cp\u003eWhether used simply as a handy stereo VCA, utility trigger button or as intended for dub-style effects on single stereo channels and sub-mixes, I hope you find AUTODUB to be a worthy addition to your modular system.\u003c\/p\u003e","brand":"Steady State Fate (SSF)","offers":[{"title":"Default Title","offer_id":39697445486646,"sku":"SSF-AUTODUB","price":189.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/ssf-autodub-ctrl-mod.png?v=1631729759"},{"product_id":"expert-sleepers-persephone-vca","title":"Persephone VCA","description":"\u003cp\u003e'Persephone' is a VCA (Voltage Controlled Amplifier) using a discrete JFET as the gain element. The JFET can be tastefully (or violently) overdriven for saturation\/distortion effects.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePersephone also includes a zero-crossing detector, which can be used to restrict gain changes to zeros in the audio waveform, preventing clicks and pops that can occur with very fast envelopes, especially on lower pitched sounds. In fact, with the zero-crossing circuit engaged, you can use a simple gate as the CV input without clicks. \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe module's signal and CV paths are 100% analogue (there is a little discrete logic involved in the zero-cross circuitry).\u003c\/p\u003e","brand":"Expert Sleepers","offers":[{"title":"Default Title","offer_id":39777822998582,"sku":"EXPERT-SLEEPERS-PERSEPHONE-VCA","price":189.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/expert-sleepers-persephone.png?v=1637171066"},{"product_id":"tiptop-audio-buchla-model-292t-quad-lopass-gate","title":"Buchla Model 292t Quad Lopass Gate","description":"\u003cp\u003e\u003cem\u003eWelcome to the Buchla \u0026amp; Tiptop Audio 200 series project. In this project Buchla has teamed up with Tiptop Audio to resume the production of Don Buchla’s 200 series and convert it to Eurorack standards. These extremely rare pieces of equipment made almost half a century ago will once again be available, and this time to a wide audience.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTiptop Audio spent a great deal of time together with the folks at Buchla to define what is a ‘good sounding’ Vactrol. All the Vactrols in the 292t and now in Buchla products are made by Tiptop Audio and are obviously at the heart of the 292t, eight of them per module to be precise.\u003c\/p\u003e","brand":"Tiptop Audio","offers":[{"title":"Default Title","offer_id":39880969715766,"sku":"TIPTOP-AUDIO-BUCHLA-292-QLPG","price":413.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/tiptop-audio-buchla-292t-quad-lopass-gate-ctrl-mod.png?v=1682358492"},{"product_id":"divkid-stereo-strip","title":"Stereo Strip - VC Channel Strip","description":"\u003cp\u003eProduced in collaboration with Befaco, Stereo Strip is a 6HP module built around the idea of a channel strip. It features a stereo VCA with CV control, stereo panner with CV control, 3 way performance mute, EQ, output soft clip analogue limiting plus input and output level switches to work as a stereo line input or stereo line output stage for a modular system. \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003eStereo Strip takes the idea of a channel strip and makes it modular. We hope that by bringing this long-established component of the audio engineering world into the Eurorack environment and by adding CV control over its key parameters that you will find new, creative ways to use it in your patches!\u003c\/p\u003e\n\u003cp\u003eIt features stereo inputs and outputs for audio or CV with EQ, voltage controlled panning, stereo VCA, performable mute and input\/output level switching for Eurorack or line level uses. Abusing the input level switching allows for some musical, modulate able and highly shapeable distortion sounds too.\u003c\/p\u003e\n\u003cp\u003eStereo Strip was designed to be a creative part of a modular patch. Creating stereo images from mono sources, shaping and modulating existing stereo images, synthesizing stereo pseudo ring modulation, sweetening FX with EQ or drastically wave shaping your oscillators, creating send FX routings with benefits or it can simply be used as a channel strip at the end of chain in a patch.\u003c\/p\u003e\n\u003cp\u003eThe addition of line level gain boosting (for the input) or reduction (for the output) allow it to work as a stereo input or output interface for external gear with the advantage of the VCA, panning and the EQ to shape the sound. Experiment with bringing external gear into the Eurorack format and then shape and modulate those sounds them on the way in!\u003c\/p\u003e\n\u003cp\u003eTry patching Stereo Strip anywhere you would place a VCA in a system and\/or explore its EQ and voltage controlled panning, which are rarer additions to the sound sculpting options for the Eurorack format.\u003c\/p\u003e","brand":"DivKid","offers":[{"title":"Default Title","offer_id":40089330647094,"sku":"DIVKID-STEREO-STRIP","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/divkidstereostripfrontctrl-mod.png?v=1651095302"},{"product_id":"joranalogue-pivot-2-analog-signal-router","title":"Pivot 2 - VC Variable Router","description":"Signal flow is an essential concept in modular synthesis: the path taken by audio or control voltages (CVs) may be long or short, branching or linear, intuitive or highly complex.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWhile the patch programmability of a modular system is its greatest strength, it can also be a weakness: quick experimentation is often hampered by the need to repatch the synthesiser to change the signal flow.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePivot 2 offers a unique solution: a compact, fully voltage controlled variable signal router. At the turn of a single knob, any signal can be routed through two external modules in series, parallel or reverse series, as well as any combination in between.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eExperiment with patching wavefolders before, after or alongside filters, shuffle multiple delay lines, precisely dial in two-stage audio compression or easily control intricate feedback patches.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eLooking beyond the basic signal routing application, Pivot 2 will also function as a complementary pair of counter-acting linear voltage controlled amplifiers (VCAs), a voltage controlled crossfader or a voltage controlled panner.\u003cbr data-mce-fragment=\"1\"\u003e","brand":"Joranalogue","offers":[{"title":"Default Title","offer_id":40118842818614,"sku":"JORANALOGUE-PIVOT-2","price":185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/joranaloguepivot2ctrl-mod.png?v=1652379813"},{"product_id":"boredbrain-music-monitr-balanced-output-mixer","title":"Monitr - Balanced Output Mixer","description":"\u003cp\u003e\u003cem\u003eListen In \u0026amp; Cue Up \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMonitr\u003c\/em\u003e\u003c\/strong\u003e is a comprehensive audio output monitoring utility for eurorack systems. The module is equipped with a stereo VCA-controlled input mixer with master volume control and VU meters, plus a powerful headphone section for both live performance and detailed monitoring.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eStereo VCA Mixer\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eMonitr’s two stereo inputs, IN 1 and IN 2, are AC-coupled specifically for audio signals, with the R inputs normalled to the L inputs. These input signals are amplified and mixed via stereo VCA circuits to reduce noise and allow for external voltage control. The CHAN 1 and CHAN 2 parameters are for manual adjustments of audio levels, while the VCA1 and VCA2 jacks accept control voltages. The full range of each stereo VCA is 10 Vpp. The mixed stereo signal is buffered and passed on to the master volume circuit.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eMaster Control\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe VOLUME parameter is a variable attenuator which controls the master stereo output level. It can also amplify the signal up to +6dB above unity gain.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe output volume is visually indicated by two 5-segment VU METERS, scaled appropriately for +4 dBu professional line-level output. Best practice is to keep the master signal volumes at or below +3 dBu (GREEN, YELLOW), with transient peaks occasionally reaching +6 dBu (RED). This will optimize the signal’s dynamic range when feeding into audio interfaces or amplifiers.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMonitr also features a MUTE OUTPUT switch that completely silences the main outputs. This is convenient once sound check levels are adjusted before a live performance begins, as the mute switch does not affect the VU meters or headphone cueing section.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHeadphone Cue\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe module’s headphone circuit is designed to drive a wide-range of headphones with enough detail and power for both studio monitoring and live performance. The LEVEL parameter adjusts the volume of stereo headphone plugged into the PHONES jack. Acceptable headphone impedance ranges from 32 Ω up to 600 Ω.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe headphone source is selected with a 3-way switch, which is useful for cueing during a live performance. The center position, MSTR (Master), monitors the primary master output signal post Volume, so the master VOLUME also affects the headphone volume. The other two positions, CH1 and CH2, exclusively monitor the two input signals respectively, and are not affected by their VCA levels (CHAN 1, CHAN 2, VCA1, or VCA2).\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWARNING: Plugging a MONO cable into the PHONES jack and cranking the LEVEL can cause damage to the headphone output circuit, as this will short excess current directly to ground.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBalanced Output\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eOUT L and OUT R provide balanced line-level stereo output of the master audio signal via 1\/4-inch TRS jacks, typically to an audio interface, mixer or amplifier. These balanced connections allow for low-noise signal transmission over longer cable runs, provided the destination input is also balanced. However, unbalanced TS cables can also be used and will simply carry the signal unbalanced.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e","brand":"Boredbrain Music","offers":[{"title":"Default Title","offer_id":40189693460534,"sku":"BOREDBRAIN-MONITR","price":269.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/boredbrain-monitr-ctrl-mod.png?v=1656698880"},{"product_id":"boredbrain-music-unifx-external-effect-interface","title":"Unifx - External Effect Interface","description":"\u003cp\u003e\u003cem\u003eUnify Pedals and Eurorack \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eUniFX\u003c\/strong\u003e\u003c\/em\u003e is a compact and flexible effects interface that interconnects guitar pedals and electronic instruments with eurorack synthesizers. The module re-scales audio levels, offers voltage-control over the dry\/wet mix, and uniquely allows for the primary and effects signals to swap sources.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eEffects Loop\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eUniFX makes it easy to process eurorack audio signals with pedals, or to process external instruments with eurorack modules. Essentially, it is a level-scaling effects loop. The module has two pairs of mono IN and OUT jacks for signals—3.5 mm at eurorack-level and 1\/4-inch at pedal-level. The slide switch labeled PEDALS-EUROFX swaps which jacks are used as the primary input\/output and which are the effects send\/return.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eTo process eurorack audio signals with guitar pedals or outboard gear, use PEDALS mode. The eurorack source signal is patched thru the 3.5 mm IN and OUT jacks, while any pedals are connected to the 1\/4-inch IN and OUT jacks.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eTo process line-level instruments or guitar with eurorack modules, use EUROFX mode. The line source signal is patched thru the 1\/4-inch IN and OUT jacks, while any effect\/filter\/etc modules are connected to the 3.5 mm IN and OUT jacks.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAudio level scaling is approximately ± 12 dB, appropriate for most pedals.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eMix Control\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe FX MIX parameter is a variable crossfader controlling the dry\/wet balance of the input and effects return signals. The amount of effects mix is indicated by the WHITE LED. With the knob turned all the way down, only the input signal is heard from the OUT jack and the LED is off. Alternately, with the knob turned all the way up, only the effects return signal is heard and the LED is fully illuminated. The center position produces a 50\/50 mix.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis parameter may also be automated using the CV input labeled MIX, wherein the knob position is used to bias the incoming control voltage. The full range of the parameter is 10 Vpp, so a typical LFO of ± 5 V will fully sweep the FX MIX up and down if the knob is in the center position.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eVCA \u0026amp; Feedback Effects\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eBecause the circuit is VCA-based and DC-coupled, UniFX may also be used like a typical VCA module for both audio and control voltages. The only difference is that the control input works in reverse—as the voltage is increased, the signal is reduced. Simply run the primary signal through the 3.5mm IN and OUT jacks, connect nothing to the 1\/4-inch jacks, and select PEDALS mode using the switch. Turn the FX MIX all the way up to have no dry signal, and apply a negative going control voltage to the MIX CV input.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAdditionally, due to UniFX’s switching effects loop topology, feedback effects can be easily achieved. Just slide the switch into the “wrong” mode, and turn the FX MIX parameter down to increase the amount of the effects return being fed back into the effects send. The MIX CV input can also be used for experimental voltage-controlled feedback effects.\u003c\/p\u003e","brand":"Boredbrain Music","offers":[{"title":"Default Title","offer_id":40189711089718,"sku":"BOREDBRAIN-UNIFX","price":129.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/boredbrain-unifx-ctrl-mod.png?v=1656699526"},{"product_id":"future-sound-system-timbral-sculptor","title":"FIL4 Timbral Sculptor","description":"\u003cp\u003eThe Future Sound Systems Timbral Sculptor is a filter, wavefolder, VCA and dynamics manager for the eurorack synthesizer format. It brings together several synthesis elements designed to alter the harmonic content of signals present at its input. It comprises a multi-mode filter, VCAs, a deadband wavefolder, a rectifier and a Lockhart wavefolder in the resonance path of the filter. The Timbral Sculptor can be coupled with one or more oscillators and modulation sources to make a full synthesizer voice. Patched correctly, the Timbral Sculptor can even function as a synthesizer voice on its own!\u003c\/p\u003e","brand":"Future Sound Systems","offers":[{"title":"Default Title","offer_id":40247389487158,"sku":"FUTURE-SOUND-SYSTEMS-TIMBRAL-SCULPTOR","price":339.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/fsstimbralsculptorctrl-mod.png?v=1658421400"},{"product_id":"zlob-modular-push-vca-latching","title":"Push VCA (Latching)","description":"\u003cp\u003eThe Push VCA is a 2hp 2 Channel DC Coupled Mute Eurorack Module.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIt features 2 independent unity gain DC coupled VCAs with led push button mutes. A mix of both channels is available at the sum, but all outputs are available simultaneously. The newest version has normalizations to +5v, so with nothing plugged into the ins voltage can be toggled on and off at the outputs and up to 10 volts can be output at the sum.\u003c\/p\u003e\n\u003cp\u003eThere are two versions available with either latching or momentary push buttons. LED button color may vary between red and yellow. but it will always be 2 of the same color.\u003cbr\u003e\u003c\/p\u003e","brand":"Zlob Modular","offers":[{"title":"Default Title","offer_id":40362445733942,"sku":"ZLOB-MODULAR-PUSH-VCA-LATCH","price":77.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/zlobmodularpushVCActrl-mod.png?v=1662052309"},{"product_id":"2hp-vca","title":"VCA","description":"\u003cp\u003eThe 2hp VCA is a dual, linear VCA. It uses the renowned 2164 SSM architecture, giving it extremely low distortion and high quality audio outputs. With a CV input attenuator, and DC-coupled inputs this is your new go-to module for voltage controlled amplification of audio or CV.\u003c\/p\u003e","brand":"2hp","offers":[{"title":"Black","offer_id":40497469358134,"sku":"2HP-VCA-BLK","price":99.0,"currency_code":"USD","in_stock":false},{"title":"Silver","offer_id":40497469390902,"sku":"2HP-VCA-SLV","price":99.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/2hp-vca-black-ctrlmod_139d7472-b920-4791-a77f-e5f96df5bee9.png?v=1666637634"},{"product_id":"instruo-carn-utility-mixer","title":"Carn - Utility Mixer","description":"\u003cp\u003eAt its core, the Instruō càrn is a four channel signal processing utility with distinct functionality and individual outputs per channel. It is optimised for both audio and control voltage signals and offers a voltage-controlled panner with constant power panning, a VCA, a ring modulator, and a signal crossfader – all housed within a compact stereo mixer format.\u003c\/p\u003e\n\u003cp\u003eAs a mixer, càrn can function as a traditional end-of-chain summing stage with a built in stereo VCA. It can also seamlessly expand to related stereo Instruō modules via its pair of stereo back jacks and included low profile stereo cable. càrn includes an optional stereo limiter that is perfect for everything between gentle signal softening to saturated drum bus distortion.\u003c\/p\u003e\n\u003cp\u003eWhether you need a feature-dense signal processor, a hyper-compact summing mixer, or a soft-clipping signal mangler, càrn will meet the challenge.\u003c\/p\u003e","brand":"Instruo","offers":[{"title":"Default Title","offer_id":43718246760766,"sku":"INSTRUO-CARN","price":439.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/instruocarnctrl-mod.png?v=1667842700"},{"product_id":"schlappi-engineering-boundary-1","title":"Boundary - Cycling Slew Limiter \/ VCA","description":"\u003cp\u003eThe Boundary is multi-purpose modulation and signal control center. It consists of a cycling slew and a four quadrant multiplier (VCA).\u003c\/p\u003e\n\u003cp\u003eThe cycling slew (which can be used as an envelope or LFO) has individual control over rise and fall, rate and shape, as well as dedicated inputs for trigger, slew (for gates or pitch cv), full wave rectification (for envelope following), and a unique BOUND input which allows for bouncing ball effects and additional modulation of the envelope.\u003c\/p\u003e\n\u003cp\u003eThe four quadrant multiplier is an OTA design and is usable as a VCA or ring modulator with a soft limiter on the output to tame extreme signals or push into distortion.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e","brand":"Schlappi Engineering","offers":[{"title":"Black","offer_id":44059241840958,"sku":"SCHLAPPI-ENGINEERING-BOUNDARY-BLACK","price":219.0,"currency_code":"USD","in_stock":false},{"title":"Silver","offer_id":44059241873726,"sku":"SCHLAPPI-ENGINEERING-BOUNDARY-SILVER","price":219.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/schlappi-boundary-black-ctrl-mod_997c382c-5b8c-4166-a7d1-542062efa00f.png?v=1668713019"},{"product_id":"ssf-steady-state-gate-multi-dynamic-discrete-low-pass-gate","title":"Steady State Gate - Multi-Dynamic Discrete Low Pass Gate","description":"\u003cp\u003eThe Steady State Gate is a novel and discrete multi-mode Low Pass Gate including an additional stage of timbre modifying circuitries.\u003c\/p\u003e\n\u003cp\u003e(More Info Coming Soon -----\u0026gt;)\u003c\/p\u003e","brand":"Steady State Fate (SSF)","offers":[{"title":"Default Title","offer_id":44077089358142,"sku":"SSF-STEADY-STATE-GATE","price":259.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/ssfsteadystategatectrl-mod.png?v=1669063446"},{"product_id":"alm-busy-circuits-mega-tang-quad-vca","title":"Mega-Tang - Quad Linear VCA \u0026 Stereo Mixer","description":"The ‘MEGA-TANG’ is a 4-channel linear VCA and stereo mixer providing per input control over level, effect send, pan and muting. Designed for live use in mind with a simple \u0026amp; compact layout, the ‘MEGA-TANG’ builds on the clean and transparent sounding Tangle Quartet VCA by adding a stereo mix output, effect sends (mono send with a stereo return) which pair great with the MFX, manual panning, soft mute buttons with LED indicators and an expansion port for future expandability.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIndividual VCA outputs are available which remove the channel from the main mix (useful for cueing and monitoring). All signals are Euro level and bar the effects return, DC coupled for CV use as well as audio.","brand":"ALM Busy Circuits","offers":[{"title":"Default Title","offer_id":44094288888126,"sku":"ALM-BUSY-CIRCUITS-MEGA-TANG","price":335.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/almbusycircuitsmegatangfixctrl-mod.png?v=1670262242"},{"product_id":"bastl-instruments-aikido-dynamic-vca-mixer","title":"Aikido - Dynamic VCA Mixer","description":"Aikido is a performative quad VCA mixer with flexible submix routing and two styles of integrated envelope followers. Clever normalization allows ready to go sidechain compression, expansion, and rapid routing experimentation.\u003cbr data-mce-fragment=\"1\"\u003e","brand":"Bastl Instruments","offers":[{"title":"Default Title","offer_id":44463418310974,"sku":"BASTL-INSTRUMENTS-AIKIDO","price":270.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/1246\/products\/bastlaikidoctrl-mod.png?v=1675112650"}],"url":"https:\/\/www.ctrl-mod.com\/en-ca\/collections\/vcas.oembed?page=4","provider":"Control","version":"1.0","type":"link"}