Intellijel Quad Inverter
Write a review
- Regular price
- $75.00
- Sale price
- $75.00
- Regular price
-
- Unit price
- per
You can almost always find a use for an inverse voltage. Use a single voltage source for panning and crossfading your VCAs and filters. Make your kick sound huge when you use inverted envelope to duck out your main mix. The inverse is always complementary.
Each output is a buffered negative version of the input. e.g. if an input is fed a 2v cv signal, the output will be a -2v signal. Audio inputs are inverted and phase shifted by 180 degrees. All outputs are normalled to the inverter input below it.
This is not used for inverting gates. For this you need a logic inverter as found on the Plog module.
Each output is a buffered negative version of the input. e.g. if an input is fed a 2v cv signal, the output will be a -2v signal. Audio inputs are inverted and phase shifted by 180 degrees. All outputs are normalled to the inverter input below it.
This is not used for inverting gates. For this you need a logic inverter as found on the Plog module.
You can almost always find a use for an inverse voltage. Use a single voltage source for panning and crossfading your VCAs and filters. Make your kick sound huge when you use inverted envelope to duck out your main mix. The inverse is always complementary.
Each output is a buffered negative version of the input. e.g. if an input is fed a 2v cv signal, the output will be a -2v signal. Audio inputs are inverted and phase shifted by 180 degrees. All outputs are normalled to the inverter input below it.
This is not used for inverting gates. For this you need a logic inverter as found on the Plog module.
Each output is a buffered negative version of the input. e.g. if an input is fed a 2v cv signal, the output will be a -2v signal. Audio inputs are inverted and phase shifted by 180 degrees. All outputs are normalled to the inverter input below it.
This is not used for inverting gates. For this you need a logic inverter as found on the Plog module.
You can almost always find a use for an inverse voltage. Use a single voltage source for panning and crossfading your VCAs and filters. Make your kick sound huge when...
- Inverts up to four incoming signals.
- Cascading architecture feeds outputs from one to another, top to bottom.
- Slim 2HP footprint.
Width: 2HP
Max Depth: 29mm
Power: 4mA @+12V, 17mA @-12V
Questions
Have any questions? We're here to help!